Comments
-
thank you
-
thank you. But can you tell me the différence between 01-ssc-1441 and the 01-ssc-0568 the descriptions are identical. excactly the same! but the price! : 1.925 USD for the first one and 1.230 for the second !! Thank you
-
i'm searching to differents resselers in Belgium (Europe) I can't find this product thanks Eric
-
HI I solve my problem creating a TNULLE INTERFACE VPN between TZ400-A1 and B1 (on first SonicWall) I was not able to cross the VPN because in the route, i Gave the Interface X2 and the Gateway : The X5 IP of TZ400 B2 (10.14.128.10) In fact i had to put the INTERFACE with the name of the VPN Tunnel interface and no GATEWAY.…
-
Hi, thank you for your answer. My problem is the following. Now i can accept 0.0.0.0/0.0.0.0 in the VPN with Broadcast Netbios Enable (but the option in IpHelper removed!) I don't have any error message. The green led in the vpn in front of 0.0.0.0/0.0.0.0 is ON. To Add 0.0.0.0/0.0.0.0 in the VPN, i create a address ANYADD…
-
Hi, I solve my problem using the vpn connexion that already exist between TZ400-A2 and TZE400-B2 Now i just need for just a few days to permit ANY ADDRESS in the VPN But when i create a Object with network 0.0.0.0/0.0.0.0 i received the message IP address can not be all zero in address Object used by IpHelper In the…
-
Hi, thank you to assist me. First, yes i try a site to site VPN but maybe it's not the good solution. Second, the reason why i do the NAT on site B is the following : As you can see on the joined image, we have 2 sites. On each site, we receive alarm from ANY addresses. Each alarm knows only the WAN IP of the Site. Then i…
-
@shiprasahu93 I solve a part of my problem..... So many hours to search for finally : Thanks a lot for your help... Without you, i'll search again and again.... Thanks!
-
@shiprasahu93 I re-create the rule. I verify that all my objects are in the good zones I put the priority on 2 for this rule but allways the same error code No traffic on that rule ! Thanks !!
-
@shiprasahu93 here is a ral time packet capture made a few minutes ago with the 159.50.228.33 ip source As you can see, Error 726 I try to change the route METRIC to 1 : same error code I send you the PCAP File (i change the extention to TXT, you must change it to PCAP) if you want to see it. Thank you
-
@shiprasahu93 here is the configuration of the X2 interface here ares the rules The red arrow shows the concerned route for my case Where Serveurs_Marne is 159.50.0.0/255.255.0.0 and PASTEUR_NETWORK includes the network 172.20.85.0/255.255.255.0 Any Port For Information , the route in blue arrow works perfectly Where…
-
Hi, thank you very much for your answers. I try to use the Packet Replay but i'm not sure for the result. When a real test is made, i received this in the packet monitor : As you can see, the packet is Dropped from 159.50.228.23 to 172.20.85.31 with port 443. I create a PCAp fil from this packet monitor. Now i use Packet…
-
Thank you very much for your answer. I'll try it next month when i'll be on place In Paris. Eric If it doesn't works, i'll be back.
-
Thank you, i submit a support request. Eric
-
Hi on X2 i've the IP 10.14.128.81/29 witch is connected to another router on IP 10.14.128.80/29 (the arrival of the packets) I receive a packet from an IP 10.55.87.87 with port 443 for a destination on another TZ-400 accross a VPN Connexion on X1 interface (WAN). I already use a similar connexion that works perfectly : I…